COILOVER KIT
58761C
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5.75” Backspace / 25mm Offset
Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 6” Backspace / 25mm Offset
Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. LIFT HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE.
APPLICATION NOTE #85: ADVERTISED LIFT HEIGHT RANGES ARE FOR A STOCK EQUIPPED VEHICLE. INCREASING WEIGHT OF VEHICLE DUE TO ACCESSORIES WILL ALTER LIFT RANGE.
APPLICATION NOTE #142: NOT COMPATIBLE WITH VEHICLES EQUIPPED WITH LOAD-LEVELING REAR HEIGHT CONTROL AIR SUSPENSION.
22-23 LC 300 2.5 VS RR CDCV COILOVER KIT
ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2022-2023 Toyota Land Cruiser 300 Series. These adjustable coilovers allow up to 1-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. When paired with ICON 2.5 Aluminum Series rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Land Cruiser 300 Series.
2022-2023 Toyota Land Cruiser 300 Series, 2.5 VS Remote Reservoir CDCV Coilover Kit, Front
Coilover Spring and Shock Assembly
Products specifications
Add-On Part
|
198000 - 2 PIN COILOVER SPANNER WRENCH KIT, 198001 - BILLET SPANNER WRENCH KIT, 191009 - ICON LONG 2.5 COIL WRAP W/LOGO (14.5-15.5) |
Adjustable Damping
|
Yes |
2917
|
Yes |
52
|
2.5 |
50
|
No |
California Proposition 65
|
WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Coil Over Springs Included
|
Yes |
Damping Adjustment Type
|
Manual |
Damping Type
|
Oil |
Dust Shield
|
No |
51
|
Yes |
Grade Type
|
Performance |
48
|
Eyelet |
Material
|
Aluminum, Steel |
Maximum Lift
|
3 |
Minimum Lift
|
1 |
OEM Wheels & Tires Fitment
|
Yes |
Recommended Aftermarket Tires
|
35 x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required) |
Recommended Aftermarket Wheels
|
ICON Alloys | 18x9" w/ 6” Backspace / 25mm Offset, ICON Alloys | 17x8.5" w/ 5.75” Backspace / 25mm Offset |
Remote Reservoir
|
Yes |
Service Parts
|
252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT |
Shaft Diameter
|
0.875 |
409
|
Center of Eyelet |
408
|
Top of Mounting Plate |
Spring Color
|
Black |
Spring Material
|
Steel |
Spring Rate Type
|
Linear |
Title
|
2022-2023 Toyota Land Cruiser 300 Series, 2.5 VS Remote Reservoir CDCV Coilover Kit, Front |
49
|
Mounting Plate |